Impact & Alternatives Of River Sand
River Sand or the Bajri we refer to the sand that is used in the Construction purposes. Today it is the most required material for the construction industry, is been widely used and utilized all over the world. The question arises is that from where does this BAJRI come? The River sand is the Sand is deposited in river beds, so the sand which we are using is actually from the dry river or from the banks of the river. Presently in states like Maharashtra, Rajasthan, Uttar Pradesh, and Karnataka sand supply are becoming a mafia because sand supplies are limited. River waters are now behind dams due to which the sand does not get continually replenished like before. Riverine habitats get destroyed as mechanical dredgers are used. Have we ever thought of the consequences for this? How does it impact on our Environment – Instream mining can have other costly effects beyond the immediate mine sites. Many hectares of fertile streamside land are lost annually, as well as valuable timber resources and wildlife habitats in the riparian areas. Degraded stream habitats result in loss of fisheries productivity, biodiversity, and recreational potential. Severely degraded channels may lower land and aesthetic values. All species require specific habitat conditions to ensure long-term survival. Native species in streams are uniquely adapted to the habitat conditions that existed before humans began large-scale alterations. These have caused major habitat disruptions that favored some species over others and caused overall declines in biological diversity and productivity. In most streams and rivers, habitat quality is strongly linked to the stability of channel bed and banks. Unstable stream channels are inhospitable to most aquatic species. Factors that increase or decrease sediment supply often destabilize bed and banks and result in dramatic channel readjustments. For example, human activities that accelerate stream bank erosion, such as riparian forest clearing or in-stream mining, cause stream banks to become net sources of sediment that often have severe consequences for aquatic species. Anthropogenic activities that artificially lower stream bed elevation cause bed instabilities that result in a net release of sediment in the local vicinity. Unstable sediments simplify and, therefore, degrade stream habitats for many aquatic species. Few species benefit from these effects. The most important effects of instream sand mining on aquatic habitats are bed degradation and sedimentation, which can have substantial negative effects on aquatic life. The stability of sand-bed and gravel-bed streams depends on a delicate balance between stream flow, sediment supplied from the watershed, and channel form. Mining-induced changes in sediment supply and channel form disrupt channel and habitat development processes. Furthermore, movement of unstable substrates results in downstream sedimentation of habitats. The affected distance depends on the intensity of mining, particles sizes, stream flows, and channel morphology. The complete removal of vegetation and destruction of the soil profile destroys habitat both above and below the ground as well as within the aquatic ecosystem, resulting in the reduction in fauna populations. Channel widening causes shallowing of the streambed, producing braided flow or subsurface intergravel flow in riffle areas, hindering movement of fishes between pools. Channel reaches become more uniformly shallow as deep pools fill with gravel and other sediments, reducing habitat complexity, riffle-pool structure, and numbers of large predatory fishes. Apart from threatening bridges, sand mining transforms the riverbeds into large and deep pits; as a result, the groundwater table drops leaving the drinking water wells on the embankments of these rivers dry. Bed degradation from in-stream mining lowers the elevation of stream flow and the floodplain water table which in turn can eliminate water table-dependent woody vegetation in riparian areas, and decrease wetted periods in riparian wetlands. For locations close to the sea, saline water may intrude into the fresh water body. Value of construction industry grew at a staggering rate of 15.10 percent annually even in the economic slowdown and has contributed to 7.5-8.5 percent of the country’s GDP (at current prices) for the past eight years. Thus, it is becoming increasingly embarrassing for people like me who talk about greening the industry to have no practical answer to this very critical question. The bigger question is: does the scientific community have the answer? And the answer I found to my delight is: yes, they do. So let us see what are the alternatives for Sand that we can consider for construction purposes : Copper Slag Presently, worldwide, about 33 million tonnes of copper slag is generated annually with India contributing 6-6.5 million tonnes. Khalifa S Al Jabri of Oman in his findings published in the internationally refereed journals such as Cement and Concrete Composites and Construction and Building Materials in 2006 recommends that 50 percent copper slag can be used as a replacement of sand in order to obtain concrete with good strength and durability requirements. Back in India, a study carried out by the Central Road Research Institute (CRRI) has also shown that copper slag can be used as a partial replacement for sand as fine aggregate in concrete up to 40 percent in pavement grade concrete without any loss of cohesiveness and the compressive and flexural strength of such concretes is about 20 per cent higher than that of conventional cement concrete of the same grade. Granulated blast furnace slag According to the report of the Working Group on Cement Industry for the 12th five-year plan, around 10 million tonnes blast furnace slag is currently being generated in the country from iron and steel industry. In of the studies about this states that the data obtained from his research shows that the compressive strength of cement mortar increases as the replacement level of granulated blast furnace slag (GBFS) increases. He further concludes that from the test results it is clear that GBFS sand can be used as an alternative to natural sand from the point of view of strength. Use of GBFS up to 75 percent can be recommended of sand. Bottom Ash India is currently producing in excess of 100 million tonnes of coal ash. Out of the total ash produced in any thermal power plant, approximately 15 -20 percent is bottom ash and the rest is fly ash. Fly ash has found many takers but bottom ash still continues to pollute the environment with no safe disposal mechanism on offer. In of the studies about this states that the mechanical properties of special concrete made with 30 percent replacement of natural sand with washed bottom ash by weight has an optimum usage in concrete in order to get a favorable strength and good strength development pattern over the increment ages. Quarry dust About 20 to 25 percent of the total production in each crusher unit is left out as the waste material-quarry dust. In of the studies about this states that the ideal percentage of the replacement of sand with the quarry dust is 55 percent to 75 percent in case of compressive strength. He further says that if combined with fly ash (another industrial waste), 100 percent replacement of sand can be achieved. The use of fly ash in concrete is desirable because of benefits such as useful disposal of a byproduct, increased workability, reduction of cement consumption, increased sulfate resistance, increased resistance to the alkali-silica reaction and decreased permeability. However, the use of fly ash leads to a reduction in the early strength of concrete. Therefore, the concurrent use of quarry dust and fly ash in concrete will lead to the benefits of using such materials being added and some of the undesirable effects being negated. Foundry sand India ranks fourth in terms of total foundry production (7.8 million tonnes) according to the 42nd Census of World Casting Production of 2007. Foundry sand which is very high in silica is regularly discarded by the metal industry. Currently, there is no mechanism for its disposal, but international studies say that up to 30 percent foundry sand can be utilized for economic and sustainable development of concrete. Construction and demolition waste There is no documented quantification of the amount of construction and demolition (C&D) waste being generated in India. Municipal Corporation of Delhi says it is collecting 4,000 tonnes of C&D waste daily from the city which amounts to almost 1.5 million tonnes of waste annually in the city of Delhi alone. Even if we discount all the waste which is illegally dumped around the city, 1.5 million of C&D waste if recycled can significantly substitute demand for natural sand by Delhi. Recycled sand and aggregate from C&D waste are said to have 10-15 percent lesser strength then normal concrete and can be safely used in non-structural applications like flooring and filling. Delhi already has a recycling unit in place and plans to open more to handle its disposal problem. M-Sand Manufactured sand is an alternative for river sand. Due to fast-growing construction industry, the demand for sand has increased tremendously, causing a deficiency of suitable river sand in most part of the word. Due to the depletion of good quality river sand for the use of construction, the use of manufactured sand has been increased. Another reason for use of M-Sand is its availability and transportation cost. Since manufactured sand can be crushed from hard granite rocks, it can be readily available at the nearby place, reducing the cost of transportation from far-off river sand bed. Thus, the cost of construction can be controlled by the use of manufactured sand as an alternative material for construction. The other advantage of using M-Sand is, it can be dust free, the sizes of m-sand can be controlled easily so that it meets the required grading for the given construction. ” it is well graded in the required proportion. ” It does not contain an organic and soluble compound that affects the setting time and properties of cement, thus the required strength of concrete can be maintained. ” It does not have the presence of impurities such as clay, dust and silt coatings, increase water requirement as in the case of river sand which impair bond between cement paste and aggregate. Thus, increased quality and durability of concrete. ” M-Sand is obtained from specific hard rock (granite) using the state-of-the-art International technology, thus the required property of sand is obtained. ” M-Sand is cubical in shape and is manufactured using technology like High Carbon steel hit rock and then ROCK ON ROCK process which is synonymous to that of natural process undergoing in river sand information. ” Modern and imported machines are used to produce M-Sand to ensure required grading zone for the sand. Benefits of Alternatives – Size, shape, texture play an important role in workability of concrete. With more surface area of sand, the demand for cement and water increases to bond the sand with coarse aggregates. The control over these physical properties of manufacturing sand makes the concrete require less amount of water and provide higher workable concrete. The less use of water also helps in increasing the strength of concrete, less effort for mixing and placement of concrete, and thus increases the productivity of construction activities at the site. Construction defects during placement and post-concreting such as segregation, bleeding, honeycombing, voids and capillarity in concrete get reduced by the use of M-Sand as it has optimum initial and final setting time as well as excellent fineness. As discussed above, since usage of M-Sand has increased durability, higher strength, reduction in segregation, permeability, increased workability, decreased post-concrete defects, it proves to be economical as a construction material replacing river sand. It can also save transportation cost of river sand in many cases.