Understanding all about Roof Insulation & its importance

The insulation of a roof is just as important as the outer material. Insulation is important to the longevity of your roofing system and has been used for centuries. Over the years, insulation has changed and adapted, but its purpose is the same; keeping heat inside when you need it and outside when you don’t.

The Importance of Roofing Insulation

Insulating the roof of your building 2saves you money every year. By controlling the internal building temperature insulation saves the need for energy. You no longer need as heating and air conditioning. Insulation reduces the amount of energy needed to run the building. Using less energy means you are keeping money in the bank and protecting the environment by leaving behind a smaller carbon footprint.
Roofing is exposed to more environmental pressures than any other part of the building, especially weather. Rain, snow and sun exposure wears away roofing and can cause damage which interferes with insulation and energy savings.

1] What Is Roof Insulation?

Unquestionably, the roof is an integral part of any building structure as it protects the structure against extreme weather. Without it, the walls and even the foundation of any structure are defenseless to damage. A roof that is well-maintained can act as an excellent defense element for the building shielding it from all harsh elements – hence roof insulation is imperative.

According to the U.S. Department of Energy heating and cooling home accounts for approximately 48 percent of the overall energy consumption. And a typical house loses nearly 44 percent of the available energy to poor insulation. Explaining in simple words, deprived of any material blocking it, warm air would rise upwards naturally and cold air will descend – Resulting in abrupt interior temperatures. There may also be significant heat gains through roofs during the summer. This means that insulating a loft, attic or roof is a simple and effective way of reducing heat loss, the size of heating and cooling systems, energy usage and so carbon emissions. Hence if you wish to improve energy efficiency in a home, you would need to work on your home insulation.

Here is a simple video that explains roof insulation:

2] Different Types Of Roof Insulation

There is a range of different materials available that are easily available for roof insulation, a few of which are comparatively cheap and can be installed without any specialist expertise:

·Blanket Insulation Or Matting Insulation

One of the most common and easiest to install is blanket insulation. These generally come in foil-backed rolls or rafters, and are held in place using timber battens between the rafters or joists. Blanket insulation is usually made of glass wool or mineral but sometimes these are also made from plastic fibers and natural fibers like cotton and sheep’s wool.

·Foam Boards

Rigid panels of insulation that are first cut and then fitted in place. Commonly foam boards are made of polystyrene, polyisocyanurate, and polyurethane.

·Radiant Barriers

Radiant barriers constrain heat transfer by thermal radiation and are more effective in hot climatic conditions. These can be easily stapled to the underside of the rafters. According to studies, this type of roof insulation can significantly gain heat.

·Blown-In Insulation

This type of insulation involves cellulose mineral fibers being blown into a void in the roof space. These demand specialist equipment and expertise, but again, these are very quick to install and are very effective for spaces that have limited access, like the gaps between roof joists.

·Spray Foam Insulation

Here, spray foam is formed of polyurethane, and then it is sprayed as a liquid which slowly expands to up to 100 times its original volume. Once it sets, it creates an effective thermal and noise insulating layer.

3] Advantages Of Insulation

As a homeowner, there are multiple reasons to insulate, here are a few:

  • Energy and cost efficiency – With efficient insulation, you will save energy and money. Around 30 percent of a building’s heat loss is in the roofing. When an efficient insulation system is properly installed, you are saving both.
  • Adds an additional layer of protection – It prevents damage in the long run that can potentially come from moisture and ice dams.
  • Reduces carbon footprint – Insulating your roof is one of the most important energy-saving projects you can complete in your home. Studies suggest that efficient insulation reduces CO2 emissions which aid in combating air pollution.
  • Prevents the growth of molds – Insulation is the best tool to prevent molds from forming. Because insulation manages the temperature and moisture of a building, it directly affects the growth of molds.

Roof insulation may add to your expenses during construction for now, but soon you would see that you are getting more returns in the term of savings in the long-run.

4] Roof Insulation – Inside Vs Outside

The insulation of your roof can be done either from inside or outside:

Insulating your roof from the outside has many advantages. In addition to avoiding emptying any rooms in the attic, insulation from the outside does not cause a decrease in your living space and limits the risk of thermal bridges. This is a preferred solution if you are renovating a facade or roof. Among other benefits, this technique leaves the frame apparent from the attic.

Insulation from the inside is a suitable solution, mainly in new construction. This roof insulation method is ideal if you have not yet fitted out the attic and allows you to keep the roof covering system unscathed.

5] Things To Consider Before A Roofing Insulation Installation

If you feel that you need roofing insulation, here are a few things you should know and consider more things to know.

  • Insulate Flat Roof From Above

A flat roof should if possible be insulated from above. A layer of rigid insulation board could be added either on top of the roof’s weatherproof layer or directly on top of the timber roof surface, with a new weatherproof layer on top of the insulation.

  • Decide Whether To Insulate Your Attic Floor Or Roof

If you plan to utilize your attic space as a bedroom, you need to keep it warm as the rest of the house. In that case, insulate the roof. But if you don’t use your attic, you can insulate the floor. This option is easier and more affordable. Insulating both the attic floor and the roof is possible. Just keep in mind that this process is difficult and expensive.

  • Get A Roof Replacement During The Fall Season

Fall makes a perfect time to replace your old roof. Your roofing contractor can do a roof insulation foam installation at the same time. This prepares your roof for the winter. With new roofing insulation, you save on winter heating.

  • Beware Of Fire Hazards

Find a qualified and legit roofing contractor that knows how to install roof insulation foil or your preferred material. Incorrect installation can create fire hazards.

Source – Gomsmartbrickc.com, adcoroofing.com

How do eco-friendly paints contribute in lower down carbon footprint?

Changing the color of your homes is perhaps the fastest way of bringing in a complete makeover. With the rooms being just the same, repainting your home walls will feel like a completely different space and this, consequently, has been a favorite tool for both homeowners and interior decorators. However, it’s not as easy a choice when it comes to choosing the kind of paint you finally bring home. It will be important to note that we aren’t talking about color here. That is as vast a topic in its own right. Right now, we are concerned about the kind of paint materials you have to choose from. Of course, the first factor in this choice will be your budget. But if you aren’t too worried about the investment, eco-friendly paints would be the perfect suggestion.

Eco-friendly paints – What does it mean?

In simple terms, eco-friendly paints refer to natural paints that have low levels of volatile organic chemicals or VOCs. If you have ever opened a can of wall paint, you must remember the sharp smell it gives out. That’s VOC. It’s the chemical you actually smell and not only does this make you cringe for a moment, but it comes with adverse health effects in the long run. The toxic chemicals will linger in the room for a long time after a paint job is complete and in some cases, will be gradually releasing themselves for the whole lifetime of the paint itself. This is the reason why painters will tie a mask while working and insist on a well-ventilated environment.

Most paints available in the market today are oil and latex-based and according to Waste Management Inc., they fall under the “hazardous” category since the color pigments are mostly made from heavy metals such as lead.  Sometimes, paints specifically meant for outdoors also contain high amounts of fungicides. Today, most local paint brands will integrate some amount of biocide in the product to increase the shelf life and as per Green America; these can be detected even after five years of the initial paint job. All of it sounds disastrous since a home is where you are meant to raise a family, be happy and stay healthy. It’s easy to get fooled by the color but it is a responsibility to understand what lies beyond the looks!

This is where eco-friendly paints come in. A rather recent trend, these paints are generally made from a huge range of naturally available materials including milk proteins, clay, balsam, citrus, and natural minerals. The milk-based paint, for instance, is made from a combination of casein (milk protein) and lime. Though these are gradually coming into a trend, natural paints like this have actually been used for hundreds of years now. If you go to any Indian county side today, you will be astonished by how smooth they have been able to paint the walls using mud and select natural wastes. While clay mixed with cow dung has been a prominent choice of paint for village homes in India, modern technology has given rise to more sophisticated alternatives like milk paints.

Strictly for interior walls, products like milk-based paints are very low in VOC levels and are completely safe to be used in homes.

How to know if it’s eco-friendly?

Strict standards have been set by organizations like EPA to ensure that a paint product passes the eco-friendly criteria. When shopping for eco-friendly paints, it is necessary that you look for:

  1. The VOC label
  2. An organic certification (check on the internet for authentication)
  3. Check for chemical ingredients of the paint.

However, it’s not just chemicals you are getting rid of your homes by choosing eco-friendly paint products. Here are some added benefits to natural paints that should be considered:

1. Minimized environmental impacts

Natural or eco-friendly paints are strictly water-based paints without any oil base. Consequently, they aren’t toxic even when put to waste. Easily biodegradable, they leave very little impact on the environment. Over the years, technology has been improving and we now have amazing products with a range of colors for natural paints.

2. Natural raw materials

Natural paints are derived from plant extracts, lemon peels, bee wax, seed oil and the kind. This is what primarily defines the nature of eco-friendly paints. Consequently, producing natural paints don’t lead to unsafe emissions and nor does it require precautions when you are applying it in your homes.

3. Health benefits

The young generation of homemakers is quite upbeat about eco-friendly paints today. Thankfully, this is the generation that does take the environment seriously and does their bit in fighting the global climate crisis we are facing. While natural or eco-friendly paints do cost a tad bit more, they do balance out the extra costs in the health benefits they provide. Being non-toxic, they do not lead to any kind of illness, normally seen with chemical-based paints.

4. Fewer coats

Another reason why natural paints offer a good cost advantage is that they need fewer coats for the job to be done. Qualitatively superior to chemical-based paints, natural paints also provide better color retention properties, better coverage with fewer coats, minimal abrasion and an extensive choice when it comes to the range of shades.

5. Minimal waste

Made from natural products, there is very little waste generation in the natural paint production process. In the cases of chemical-based paints, several toxic by-products are produced during manufacturing and this alone leads to the toxicity of the environment. A more serious concern with the same is that these toxic wastes continue to harm the natural resources for several years to come. However, eco-friendly paints don’t come with any such bi-products.

A home is supposed to be the sanctuary for a family. This is a place where you bring kids into your life and see them grow. It certainly is a good practice to go for natural products, especially when it comes to the wall paint you are using. They are the part of the household that you most interact with and you can leave it to chance for an illness to creep underneath.

Roof Vent is Important for a Sustainable Building!

Roof vents are also called attic vents; these vents ensure there is a good amount of airflow and ventilation in your attic. Roof vents play a critical role in the proper functioning of your entire home for a number of different reasons.

Air intake and exhaust vents are used in ventilating steep-slope roof assemblies to provide a means of allowing outside air to enter and exit attics and ventilation spaces.

Intake Vents: Air intake vents are used to allow outside air to enter into attics and ventilation spaces. Intake vents should be located along a roof assembly’s lowest eave at or near soffits or eaves.

Intake vents are best used with exhaust vents that are located at or near a roof assembly’s peak. This configuration of ventilation air intake along low points and exhaust at high points takes advantage of natural convection.

These increase the life of your roofing, permit the proper functioning of your heating and air conditioning system (HVAC), etc. Also, improper or insufficient ventilation can make your home prone to mold growth from locked-in moisture – this in turn, may lead to serious health issues. Furthermore, poor ventilation also increases energy cost – which in other words means higher electricity bills. Owing to its importance, let’s find out what roof vents are all about and their significant role in making your home, energy-efficient and keeping you and your family healthy.

Why Is Ventilation Important When It Comes To Your Roof?

The very need for roof ventilation wasn’t documented well until the early-to mid 20th century. That is when organizations like the American Society of Heating, Refrigerating & Air-Conditioning Engineers (formerly ASHVE) and Forest Products Laboratory documented that building condensation hitches could be produced by poor roof ventilation. Let us highlight the main purpose of Roof Vents:

  • Proper Roof Ventilation Helps To Keep The Attic Cool And Dry

Normal household activities like taking a shower, washing clothes and running a dishwasher, all produce moist, warm air, which rises into the attic. When the warm and cool air hits, it condenses and wets the framing and insulation. If this wetness continues to build-up without drying, it may result in the development of mold on the insulation and rafters of the roof. This can lead to extreme respiratory issues, and eventually, cause structural damages to the home’s roof.

When the roof is properly ventilated with the right type and number of roof vents, it can help in preventing moisture and heat issues.

  • Reduces Energy Costs.

When the outside temperature rises, we all wish to stay cool inside. If a house has a properly vented roof, it efficiently allows the heat to escape – this reduces the workload on your air conditioner.

So, it’s quite simple – when an air conditioner runs less it means lower electricity bills.

  • Extends The Life Of Your Roof

Extreme weather conditions take a huge toll on the roofs. Properly ventilated roofs benefit the roofs when it’s tremendously hot or cold outside.

When the outside temperature rises, it heats the roof – In fact, the temperature on the rood can nearly double. And a hot roof shed over badly vented attic results into an increasingly hot attic. You may ask why? This is because poorly ventilated attics do not have an escape route for the heat which eventually builds up. This continuous heat built up can damage the roof shingles inside out – decreasing the life of the roof. When a roof is evenly vented it allows the hot air to escape keeping both the roof and attic cooler – ultimately causing less damage to the shingles.

In colder regions ice damming happens when heat from inside the attic mixes with heat from the sun to melt the snow in your warm roof. This melts the snow and the resulting water runs to the edge of the roof, and it begins to refreeze. As the ice and water build-up at the edges of the roof, it can back up behind/underneath the roofing materials, causing damage to your whole roof system, your attic and even inside the walls of your home.

A properly ventilation of the roof helps this warm air to escape before it gets the chance to melt the snow and ice on the roof. All in all, poor ventilation causes damage to the roof, hence it is crucial to ensure the roofs are properly ventilated.

You May Ask How Ventilation Works In A Home?

Ventilation works only when air flows. There are 2 main methods to create airflow within an attic:

  1. Mechanical – that requires a power source
  2. Natural – Whenever possible, natural roof ventilation is used. Here the stack effect and the wind effect work together to naturally circulate air.

The stack effect transpires when hot air rises and produces a higher pressure at high points in the attic. Hot air that escapes is known as exhaust. However, this hot air cannot escape without an inlet for cooler, low-pressure air. The cool air that enters is referred to as intake. When the wind blows against the outside of a roof and increases the volume of intake and exhaust, it is known as the wind effect. Intake and exhaust generate the natural flow of air to create a well-vented attic.

Types Of Roof Vents

Typically, there are 2 basic kinds of attic/roof vents i.e. intake vents and exhaust vents.

1. Intake Vents

These are placed along the soffit to allow fresh air directly into the attic. The common types of intake vents are:

Gable – This type of vent is found on either side of your home, beneath the peak of the roof, and on the siding. They can help the airflow out of your attic while preventing moisture or snow from entering.

Static – These are made of a sheet metal cylinder with a flashing collar and a metal hood to keep rainwater out. Holes are cut in the face of the roofs and these are installed in rows. The effectiveness of static roofs depends on how many are installed; one of the biggest disadvantages of this roof is penetration, as they are prone to leakage.

Soffit – A soffit vent is perforated but installed the same way that a solid soffit is. They are either fitted continuous or between the rafter tails. These offer improved airflow during the summer and protection against ice and moisture buildup in the winter months.

2. Exhaust Vents

These are installed in the upper third of the roof to allow attic air to escape. The different types of Exhaust vents are:

Static vents – these include ridge vents which allow the air to escape. These are installed along the ridge of the roof. They offer uniform ventilation through the home’s attic. These are available in several lengths and widths and can be fit to work with a range of roof pitches. Ridge vents are considered the most efficient and cost-effective.

Power ventilators – This type of roof vents suck out air from the attic. They are turbine vents which consist of a turbine mounted on a sheet-metal cylinder. They are installed like roofline vents along the face of the roof. When the wind blows, it spins the turbine, which in turn draws air up out of the attic. Their effectiveness, naturally, depends on whether the wind is blowing or not.

Understanding how roof vents work is highly technical, it is advised that if you don’t know how your roof vents work, or if you’re unsure about your attic ventilation in general, then you should talk to a roof inspector about your current system and any inherent weaknesses that may be at work. The risk/reward for having no ventilation or poor ventilation, along with the negligible cost of installing a good-working ventilation system makes them one of the unforgivable sins of home maintenance negligence.

Want to improve the indoor air quality of your home, Buy or Submit Inquiry for products. Check here.

Understand the Roof Preservation methods to improve the energy efficiency of the building !

Scrutinizing a home during a watchful walk through all the areas is an easy task. What’s not so easy is determining the actual condition of the roof that lies over your head. So, when was the last time you did a thorough roof inspection?

Regular roof inspections are incredibly valuable because they let you catch budding issues with your roof. Without it, the problems with your roof will grow leading to the need for costly roof replacements. The importance of a roof for a home is often overlooked and dreaded when it comes time to face replacing it. So, if you wish to save money in the long run and protect your home, this guide will tell you the true value of regular roof inspection.

Before That – What Is A Roof Inspection?

Even the strongest and most durable roof can have some weakness. Inspecting your roof at least twice a year can help you to prevent structural damage to your home, especially after the rains or snow. The main aim of carrying out a roof inspection is to locate problem spots and potentially vulnerable areas. Few of the most common problems associated with roofs are:

  • Loose, broken or missing roofing material
  • Blistered, curled off split shingles or tiles
  • Shingle granules in rain gutters
  • Improper air conditioning or swamp cooler installation
  • Sagging between rafters or near ridges
  • Broken or loose shingles near the ridge and hip lines
  • Rusty metal where house meets the roof
  • Loose, missing or corroded flashing
  • Proper ventilation to allow the roof to breathe
  • Depressions near vent pipes, clogged drains or separations in flashing that cause water pooling

The main purpose of roof inspections is to identify problems as well as gauge the remaining life of a roof.

Read: 5 Commonly Asked Questions In Roof Repair

Top Reasons A Roofing Inspection Is More Important Than You Think

Regular roof inspections are a critical part of homeownership. Without them, you could possibly be putting your home shelter at serious risk. Here are a few reasons that could make you think why inspecting your roof is more important than you think:

  • Identify Problems While They’re Minor – Roofing problems do not happen overnight, they begin with something that’s apparently mild, like leaning pipe supports, and progress to perforation and leak. An inspection by someone who’s acquainted with the early warning signs can correct things before they go out of your hand.
  • Curb Appeal – A regular roof inspection can snitch that out of place shingle you might miss, elevating your curb appeal for the entire neighborhood.
  • Protect your Warranty – Many roofing warranties demand annual or bi-annual roof inspection. If you fail to prove that you did one, you may probably void your warranty.
  • Make a Path Correction – Roof inspections are not just to catch problems while they are budding but also to give you a chance to stop doing things which are unintentionally harming your roof.
  • Extend the Lifespan – Professional roof inspections will let you know when the sporadic shingle needs to be replaced, which in turn will prevent moisture from seeping into its sub-layers, consequently extending its longevity as a whole.
  • Save Money – Annual inspection for your roof will end up saving you money in the long run.
  • Help the Environment – Irrespective of the fact that there are asphalt shingle recycling facilities available today, the majority of old roofing shingles still end up in landfills. Shielding the current shingles—as well as insulation beneath it—is better for your wallet and the environment.

Roofs are difficult to check, and because homeowners don’t usually think to inspect them, any damage that has occurred goes unnoticed and undetected, sometimes even for extensive periods. Therefore, you must never underestimate the value of a roof inspection.

Roof Inspection Checklist

For most homeowners, identifying those minor issues can be almost impossible. Here’s a simple roof inspection checklist that can help you understand what’s goes on and what can go wrong during the process:

1. Inspect Your Roofline

Roof inspection begins seeing how it looks on the ground. Professional roof inspectors check the slope and profile, to ensure the lines make sense for the home. Preferably, the peaks of the roof should be parallel with the ground and display no signs of warping. Also, the sides of the roof should be uniform and the materials shouldn’t bubble or look bent. If they are, it’s a sure shot sign of roof damage.

2. Inspect the Roofing Materials

With asphalt shingles, look for cracks, warping, and patches. Sometimes shingles can go missing or loosen up, these can increase the risk of leaks and water damage. With metal roofs, check for dents, rust, and frail spots which could allow water to penetrate between the materials and the sub-roofing. When materials look worn or damaged, repairs might be suitable. But when they are old and performing poorly, a full replacement may be suitable.

Importance Of Using the right Materials: There are various innovations on roofing solutions that provide enhanced looks and add strength to the construction. It is advisable to use the right materials. The material such as asphalt shingles, slate, metal, clay, and concrete materials should be highly evaluated and then used. Look matters but in this case the longevity is important too.

With the growth of technology, the organizations are coming with various options that are really sustainable, beautiful and strong to safeguard our home safety. House owners have different options when it comes to installing roof tiles suiting various purposes. These tiles are blended with different materials and colors making it worth applying on the roof. Therefore, it’s highly essential to choose the perfect combination to safeguard of your roof safeguard your life.

3. Monitor Flashing

Roof flashing plays a huge role in restricting water from entering inside a home through the roofs. Hence inspecting the flashing is very important. Rust, warps, and cracks are all signs that water gets trapped between the flashing and your roof. If ignored, you will soon see visible leaks inside the home.

4. Check the Gutters

One of the best ways to reduce the risk of roof leaks is through inspecting the home gutters. If your gutters appear bent, have tons of debris in the channel, or has started to pull away – water won’t drain down where its supposed to. In its place, it will soak into the base of the roof or the siding increasing the risk for mold or leaks.

5. Check The Attic

When it comes to inspecting the attic, one needs to confirm the insulation levels are appropriate and that the insulation is in good condition. The roof inspector will look for signs of pests and unsolicited critters as these increase the risk of leaks and roof damage. Another thing, the attic should get enough airflow and ventilation.

Some areas of the roof are tough to inspect for the homeowners; hence it is recommended that the inspection is done by professionals.

6. Check Mold/Rot

Roof attic is one of the warmest places in the house, and even if the insulation is in good shape, excess moisture is bound to cause damage. Here one needs to check the attic for signs of mold and mildew growth and check the wood for signs of rot and deterioration.

Once the roof inspectors are done looking at the interior and exterior of your home, they get an idea of the condition of the roof. You may have extensive repairs ahead. Do take care of those repairs before it causes permanent damages. Believe it, taking an action now will be much easier and affordable. No homeowner wants to deal with unforeseen repairs in the future. Hence, following your roofer’s suggestions is the best way to get the most out of your roof.

Glazed Iso Balls: The Building Material that keeps the Building Roof Cool

infrastructure development

Construction and infrastructure development are growth engines for all economies, including India’s. It is estimated that India will spend $432bn by 2030 on infrastructure development as its seeks to improve the quality of lives for its citizens and leverage its abundant resources. Further, it is estimated that 70 percent of the buildings that will make up India’s infrastructure development by 2030, are yet to be built. This presents a huge opportunity to address sustainability challenges through the inclusion of practices that enable particularly energy savings and resource management on the whole.

The need to adapt our construction techniques is further substantiated by the increase in temperatures. India is witnessing significant annual gains in temperature since the year 2000. According to recent data from the Indian Meteorological Department (IMD), the decadal mean surface temperatures across the country now registers in at the 40?to 42 degrees centigrade mark. As a result, a new challenge is emerging – one that will demand immediate attention!

As it stands, less than 10 percent of Indian households have access to air conditioning units, while more than 60% of urban roofs are made with conventional building materials that trap heat. As urbanisation and the demand for higher living increases, the need for air-conditioning will increase – leading to further energy demands. Fortunately, there are several technologies now available in the market to aid in resource, particularly, energy management. One such technology is cool roofs.

Cool Roofing Through Perlcon GIB

One of the building’s fore-most lines of defence against energy wastage is the roof. With proper planning – a roof can be designed to drop energy costs of a building by up to 20 to 35 percent – just through the application of technologies that prevent the transfer of heat from the roof surface through to the interior of a building. The GLAZED ISOBALL (GIB) from Perlcon Premix is one such technology that deters convectional transfer of heat into a building – leading to energy savings.

PERLCON GLAZED ISOBALL (GIB):

GIB is a light weight material produced through a special process. The material is in the form of glass like bubbles. These are closed cell particles with high mechanical strength, very low water absorption & very high fire resistance characteristic. GIB gets its mechanical and chemical properties from Perlite and as such, GIB is chemically inert giving it long lasting excellent heat & acoustic insulation characteristics.

GIB can be mixed with cement, minerals gypsum, fly ash etc., to make variety of finished products. Due to its low water absorption property, if GIB is used where water is used to mix the different materials, it will help in reducing water consumption, drying cost and increase productivity. More over because of the its low water absorption property the volume of mass remains same after addition of water in the concrete/ mix.

Costs & Energy Savings:

GIB Cool roofs save energy and costs by upto 35 % by reducing cooling load requirements in a building. This is achieved by keeping the temperatures inside the top floor of a building lower, as seen from the field performance. As a result, the need for air conditioning is reduced leading to a reduction of the energy loads in the building. This leads to lowered energy bills as well as lowered load on power grids – leading to enhanced distribution of electricity.

Climate & Environment Benefits:

The urban island effect is important to consider especially in urban clusters of warm countries. The accumulation of structures and infrastructure leads to the increase in temperature of the surrounding areas. GIB cool roofs can aid in addressing this as it reduces the amount of heat trapped within a structure. This improves air quality of the surrounding areas, leading to a more comfortable experience within urban clusters.

ROI

By utilizing GIB cool roofs, structures are prevented from excessive heating thereby preventing excessive expansion and contraction of the materials and reduce cracking incidences, prolonging the roof’s life. As a result, there is a reduction in maintenance costs for the structure.

Sustainability

“Perlite is a versatile and sustainable mineral that is mined and processed with a negligible impact on the environment. The global green community recognizes perlite-enhanced products-like lightweight insulating concrete roof decks-as a high-performance solutions drawn from a natural material of nearly unlimited supply throughout the world.” – Perlite Institute

1st Sustainable Story – A Story which Inspires ! Story of Panache Green

Panache Green

Many people have claimed to save the Environment, sustain the nature and save the resources, But only some actually contribute in the Sustainable Development for The Society. ECONAUR is working with intent to promote the Sustainable Products and contribute in developing the Green Building in the Country. So, on the Occasion of World Environment day we are featuring a Sustainable Success Story of PANACHE GREEN, which is working in “Energy Efficient & Protective Building Enveloping” and providing services such as “Cool without AC Buildings”. Since then, and providing the quality based heat reflection & water protecting products and services with eco-friendly product range.

Mrs. Neetu Jain Started Panache Green in year 2011, when green building sector was evolving and the people were not aware about that, so took a chance and entered into Roofing market and worked on making Green Buildings. Keeping the vision of promoting Green innovations, Panache was inspired to build New Buildings in country, wherein they intended to create 100 sustainable societies, contributing to their long term vision of “Creating Cool Green Cities!”

 

About Product 

Panache Green Solutions is leader in Cool Roofing solutions & Water proofing technology and a strong supporter of sustainable and renewable building technologies. Having its own research & development in-house & having keen sense of innovation we try to provide value-for-money solutions without compromising the technical integrity of complete ENERGY CONSERVATIVE COATING for all structural constructions & GREEN BUILDINGS ; besides Heat , Water repelling & waterproofing systems also is part of our product range that is based on silicone technology, cross linking technology, nanotechnology & IR Reflection Technology.

 

Panache has its own product & development department with well-equipped quality assurance laboratory. Panache is primarily involved in manufacturing, marketing & distribution of innovative products – chemical coatings & products for energy conservation & Insulation & building protection, which includes – IR Reflective Coatings, Insulating screed, waterproofing products, Industrial coatings & water based wood protecting / finishing coatings. Panache is the pioneer and technically sound in Cool roof system. It Modified the Cool roof system to combat the atmospheric conditions & sustain its performance in Indian climatic conditions.

 

 

In the conversation with our Representative, the Lady Entrepreneur Mrs. Neetu Jain shared her Journey.

How did you started working on the idea“Started working on idea as a decision due to the circumstances and then attended the conference of IGBC and got the inspiration to develop the complete business on Green products”.
What was your Target sector“Industries , Green Buildings ,gov sector, affordable houses,  retail societies”
                                                                                 
Mrs. Neetu Jain
Challenges faced during the Journey“When we started no one was concerned abt cooling all were req waterproofing, testing facilities were not there to proove yr performance & product specs . Unawareness abt the tech and climate sensitivity was the biggest challenge”.
What was the problem which was being targeted“extremeThermal discomfort, and raise in electricity bills , city temp increase is the main problem which we targeted; cool roof gives drastic thermal comfort & reduces heat stress”.
How did it help to eradicate the particular problem – “In factories sheds and in houses without AC it makes the temp bearable increasing the thermal comfort, reduces the AC consumption, thus reducing the electricity bills”.
Any support you got from the connected associations“not initially , now the things are proven and people supports”
Till now in which regions you have installed your product“Projects Completed  in PAN India”
About your team  – Team is highly motivated & enthusiastic by Guidance of our Chairman – Dr Mittal, Founder – MD – Mrs. Neetu jain, Co Founder – Mr Brijesh Tiwari , Director – Mr Sharad Jain , Director – Mr Naman Jain and other Supportive Team Members
                                                   
Panache Green team
Awards & Recognition for Panache Green :
  • Projects & Products Certified by IGBC
  • Products Green Pro
  • Panache’s innovation has been awarded by Power of Idea awards by Department of Science and Technology (Govt. of India), IIM Ahmadabad and Economic Times.
  • Panache’s products have been installed in research projects of DOE, US.
  • Panache invited by DOE, US for GSEP
  • Participated in Research project of TARU; “Thermal comfort without AC”. 
  • Participating with Coimbatore Municipality for Energy saving & Temp reduction at city level.
  • Management Vice chairperson for IGBC, Vadodara Chapter.
  • Management participant in Core committee of IGBC.
  • Panache initiated the CSR activity of GCGC Foundation.
  • Management is associated with many dignified organizations – Rotary, BNI, IGBC, CII, VCCI, FGI and many more organizations.

Further Sharing about the Product and Company Mrs. Neetu Jain says “Our products are internationally certified for its value system & required parameters. They are approved for LEED, IGBC & GRIHA specification. Our Cooling range of products with application are GREEN PRO approved and many of our other new products of are in process of Green Pro, GRIHA Certification. Panache products have been used in commercial buildings, industrial sheds; LEED rated green buildings and households with customers realizing the versatile benefits.

We at Panache believe that our success is our people’s success. We employ people, built a community and extended family around the business! What matters most about our business is that we conduct our business in a way that’s honourable, ethical and empowering to our people and to the marketplace. As a business, we have a platform to create a culture where people can thrive, have a mind-set of empowerment, tolerance and community. Leadership is the key.  With team of empowered leaders aligned with the same vision and mission we consistently communicate and ensure that we are living up to, we thrive to make the world worth living for generation to come; by developing the innovative products & system for COOL CLEAN GREEN INDIA.”

We wish all the best to Panche Green team and Neetu Jain and Thanks for the valuable contribution to the Society.

Join Our Newsletter Today On The Sustainable Tech Insights

Stay updated with all latest updates,upcoming products & tech on Econaur!
Subscribe
SUBSCRIBE NOW
close-link

Join The Social Community Now!

Join the Social community Interreact with professionals related to building industry share projects get updates, tech insights and many more !
JOIN NOW
.
close-link
X
X