When we make our own home, It is very important to think about the energy consumption for that. When we make home we already decide on all the external fittings and appliances that you would like to install but we don’t think about the measures to reduce electricity bill. These might include things like fans, LED bulbs, curtains, cabinets and other furniture, but have you spared a moment to become aware of the materials used in your walls?
In general, people just think about the type of paint that they would like to use externally so that it looks good, without giving a thought to the actual walling material used. We spend a major portion of our lives in our house. It is important for us to understand how using better construction materials can make a big difference in terms of living comfort and cost savings while contributing to the lowering of global climate change. Let’s talk about some measures to reduce electricity bill
RCC, Concrete Bricks or Porotherm Bricks?
Traditionally in India, builders and construction companies use concrete bricks or RCC shear walls, because they are cheaper and easily available. Bringing down the cost of the project for them. The Bureau of Energy Efficiency is introducing new legislation to make the use of green energy materials in the construction industry mandatory. Newer measurements of sustainable building materials factor in measures like U Value and RETV. (Residential Envelope Thermal Value)
RETV – What Is It and How Does It Matter?
The ‘U value’ measures the thermal conductivity or transmission of any material. The lower the value, the better the thermal comfort. RETV is an extension of the U Value, used to measure the thermal performance of the building envelope (external-facing wall, doors, windows and glass surfaces), or it can be seen as an indicator of thermal comfort. In short, if the RETV is lower, the house will be naturally cooler in summer and warmer in winter, without any use of external air conditioning. Globally, the RETV value of 15 or less is considered to be ideal for use in walling materials.
More Than 24K INR in Savings – Too Good to be True?
A recent report conducted by GKSPL ( Greentech Knowledge Solutions Pvt. Ltd.), did a comparative study on the different available walling materials. The report is titled “Calculation of RETV for Residential Projects: A Comparative Study of Different Walling Materials for Various Climate Zones” and is available here. (Add a link to the report )
The findings of this report are an eye-opener for consumers, who had no idea of the cost savings
Involved in using RETV compliant walling material. For a typical 100 m2 (appx. 1080 Sq. Ft) built-up area, the walling area is approximately 150 m2. It is assumed that 1725 bricks are required.
The study found the RETV value of the clay-based Porotherm bricks to be between 6.9 to 10.5 across different climate zones, while the corresponding values for concrete blocks and RCC walls were between 13.5 to 22.5. A huge difference!
By using RETV compliant bricks like Porotherm, the temperature in the house was lower, in the range of 3° C to 7° C between the Porotherm house and the Concrete block house. Using a Coefficient of Performance of 3.0 for the air conditioner, for the same built-up area, RCC shear walls would consume 6,233 kWh units annually, while Porotherm Thermobricks would consume just 3,400 kWh units, which makes a difference of around 2,833 kWh annually. This leads to a direct annual cost saving of ₹ 26,913. (Electricity unit rate in Hyderabad is ₹ 9.50 / kWh)
It is imperative to talk to your builder, contractor, or architect to ensure that they use RETV compliant walling material. It results in savings of more than 24K INR, along with the reduced need for external air conditioning. These materials also provide better circulation and superior air quality in the house. Do your bit to save our planet and your own hard-earned money. Go green!