Pump SizeDN50 mm
CapacityQup to 29 m3 /hr
HeadHup to 16 m
Motor powerPup to 1.1 kW (1Ø)
up to 1.5 kW (3Ø)
Temperaturetup to 400C


Vertical, monobloc pumpset, free flow impeller of two sizes, 1Ø and 3Ø motors with IP 68 protection, 1Ø motor with built-in thermal overload protection and float switch, bi-directional mechanical seal Suitable for pumping surface water, rain water, waste water containing solids, drainage of sumps liable to flood, agricultural pits and canals.


Vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey cast iron variant), non-explosion-proof.


Handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.

Overview of technical data

Q (50Hz)0.0 – 40.0 (m³/h)
H (50Hz)1.3 – 16.0 (m)
Type of bearingBall bearings
DriveElectric motor
Drive frequency50 Hz
Type of driveElectric motor
Drive voltageLow voltage
Connection to power supply400 V, 3~
Explosion protectionOHNE
No. of impeller entriesSingle entry
Impeller material (EN standard)JL1030
Type of couplingNone
Type of lubricationProduct lubrication
Max. permissible fluid temperature40.0 (°C)
Pump set locationWet well
Shaft material (EN standard)1.4021
Suction characteristicsNon-priming
Suitable for drinking waterYes
Type of casingAnnular casing
Type of impellerFree flow impeller, Cutter
Type of connectionFlange
UNSPSC classification4015150300
Casing material (EN standard)JL1030
eClass assignment36410101, 36410000, 36410100
Free passage60.0 (mm)
Installation positionVertical
Shaft seal typeMechanical seal, Shaft seal ring
Main applicationsWater, Waste water / sewage, Building services
Casing materialCast iron
Maximum drive rating1.5 (kW)
Type of installationTransportable, Stationary
Maximum speed of rotation2900.0 (1/min)


Write a Review

There are no reviews yet.

0 out of 5
    No more offers for this product!

    General Inquiries

    There are no inquiries yet.