Excel InsulX utilizes the latest in Nano-technology to perform UV resistant membrane with excellent durability even in harsh/hot Tropical & Middle East climatic conditions.
Excel InsulX is a first of its kind elastic pure insulation coating which can be applied on the interior or exterior of the new or existing roofs, plastered walls, pipelines and storage tanks to stop the penetration of the heat/cold through the coated surface. Using innovative Nano based technology, the ultra-thin insulation coating provides up to 40% energy savings.
Surfaces must be dry and free from oil, dust, dirt, grease and loosing materials. The substrate should be firm, in case of gaps and cracks fill with suitable sealant and ensure the surface is level.
Primer not required. Suitable water based primer can be used if required.
Stir well before use. Do not apply if rain is expected within 24 hours. Apply the material using brush or roller. A second coat is applied at right angle after the first coat is dry. It is recommended to apply 2 coats of EXCEL InsulX to get a dry film thickness of approximate 1 mm. Multiple coats can be applied to achieve higher thickness as per the requirement.
It requires 4 – 5 hours to dry in between 2 coats and 72 hours curing is adequate for foot traffic. Low temperature and high humidity will slow down the curing process. 7 days are required to attain full strength. In case of expected rains, do not apply EXCEL InsulX.