|| India's First Integrated Platform for Green Building Solutions ||


The very fast development of protective effect
Distinctive nano effect
No or only low colour enhancement
Excellent oil- and grease repellent effect
Excellent reduction of water – and dirt absorption during periods of moisture
Fast liberation of humidity during dry periods due to high vapour permeability
Evidently low adhesion of paints on treated stone surfaces

0 out of 5
Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

Products Specification 

MARMO BARRIER PLUS – solvent base is ready to use weather-resistant and non-yellowing impregnation based on high-quality organic active substances. The product is absorbed by the stone due to the capillary forces, however, without closing the pores.


  • UV Resistant
  • Non Yellowing
  • Stain Resistant
  • Enhances Color Tone
  • Helps Protects Against Graffiti

Technical Specification

  • Coverage: Approx 5 — 20 m2/liter
  • Depending on the absorptive capacity of the stone. -Colour: Transparent Yellowish
  • Density: Approx 0.78 g/cm2


  • Using a paintbrush, cloth, fleece, or sponge applicator,
  • Apply MARMO BARRIER – PLUS undiluted to a completely clean and dry natural stone surface.
  • Allow the material to naturally absorb evenly.
  • Within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth or sponge.
  • Avoid applying in direct sunlight. Wait 24 hours after treatment for the finished surface.
  • In the case of treating natural stone surfaces that receive foot traffic, do not walk on the treated surface for 4-6 hours after treatment.

User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “MARMO BARRIER PLUS”

Your email address will not be published. Required fields are marked *

No more offers for this product!

General Inquiries

There are no inquiries yet.

Compare items
  • Total (0)
Shopping cart