MARMO BARRIER

Products Specification

Marmo Barrier – solvent base is ready to use weather-resistant and non-yellowing impregnation based on high-quality organic active substances. The product is absorbed by the stone due to the capillary forces, however, without closing the pores. The product is characterised by the following properties.

Advantages

• Deeper penetration into substrates
• Excellent Hydro Phobic Properties
• Highly resistant to water-based staining damages
• Surfaces treated with MARMO BARRIER are harder and less slippery
• Easy to use & clean
• U V resistant

Technical Specification

• Coverage: Approx 5 — 20 m2/litre — depending on the absorptive capacity of the stone.
• Colour: Transparent Yellowish
• Density: Approx 0.78 g/cm2

Application

• Shake the container well for one minute before opening the container for use.
• Apply MARMO BARRIER uniformly over the surface till it is damp, using a clean white cloth/roller or paintbrush.
• Leave the treated surface for 4-5 minutes and remove excess product from the surface using a clean white cloth.
• The cleaning should be done, using a white cotton cloth by pressing the cloth on the applied surface and buffing the area in a circular motion, before the liquid dries on the surface.
• In case any dried residue is left on the surface, the same can be removed by reapplication of MARMO BARRIER and cleaning the excess immediately.
• Multiple applications may be required for some stones. In case of multiple applications, allow a 6 to 12 hours gap between the applications.
• Allow cure time of 72 hours (Air Cure) for sealers to become completely effective.