|Pump Size||DN||50 mm|
|Capacity||Q||up to 29 m3 /hr|
|Head||H||up to 16 m|
|Motor power||P||up to 1.1 kW (1Ø)|
|up to 1.5 kW (3Ø)|
|Temperature||t||up to 400C|
Submit the inquiry to get direct support from our product team
Vertical, monobloc pumpset, free flow impeller of two sizes, 1Ø and 3Ø motors with IP 68 protection, 1Ø motor with built-in thermal overload protection and float switch, bi-directional mechanical seal Suitable for pumping surface water, rain water, waste water containing solids, drainage of sumps liable to flood, agricultural pits and canals.
Vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey cast iron variant), non-explosion-proof.
Handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.
Overview of technical data
|Q (50Hz)||0.0 – 40.0 (m³/h)|
|H (50Hz)||1.3 – 16.0 (m)|
|Type of bearing||Ball bearings|
|Drive frequency||50 Hz|
|Type of drive||Electric motor|
|Drive voltage||Low voltage|
|Connection to power supply||400 V, 3~|
|No. of impeller entries||Single entry|
|Impeller material (EN standard)||JL1030|
|Type of coupling||None|
|Type of lubrication||Product lubrication|
|Max. permissible fluid temperature||40.0 (°C)|
|Pump set location||Wet well|
|Shaft material (EN standard)||1.4021|
|Suitable for drinking water||Yes|
|Type of casing||Annular casing|
|Type of impeller||Free flow impeller, Cutter|
|Type of connection||Flange|
|Casing material (EN standard)||JL1030|
|eClass assignment||36410101, 36410000, 36410100|
|Free passage||60.0 (mm)|
|Shaft seal type||Mechanical seal, Shaft seal ring|
|Main applications||Water, Waste water / sewage, Building services|
|Casing material||Cast iron|
|Maximum drive rating||1.5 (kW)|
|Type of installation||Transportable, Stationary|
|Maximum speed of rotation||2900.0 (1/min)|
Be the first to review “Ama-Porter”
There are no inquiries yet.
There are no reviews yet.