|| India's First Integrated Platform for Green Building Solutions ||

ALLWEATHER Weather Proof Exterior Emulsion

(1 customer review)
Brand
5 out of 5

All-Weather Weatherproof Exterior Emulsion is a water-based, highly modified acrylic emulsion that prevents moss and algae growth and is ideal for extreme climatic conditions.

Directions for Use (Exterior)

Cleaning: Ensure that the surface to be painted is free from any loose paint, dirt, grease dampness or seepage. Any previous growth of fungus, algae, or moss is to be removed thoroughly by vigorous wire brushing and cleaning with water.

Primer: Freshly plastered surface should be allowed to cure completely. For both fresh and repainted surfaces, apply one coat of Octagreen’s First Coat Exterior Primer by recommended thinning with water. Allow the primer coat to dry for 4 hrs.

Topcoat: Apply 2-3 coats by diluting 1lit., with a maximum of 400 ml. of clean water. A gap of 4-6 hrs should
be given between the coats. Ensure that horizontal surfaces like the top of windows, ledges, etc., are painted with one additional coat. Ultraguard has been formulated to be applied as package consistency. Dilution if required with a maximum of 300ml. of clean water.

 

Submit the inquiry to get direct support from our product team

Added to wishlistRemoved from wishlist 0
Add to compare
  Inquiry

Products Specification

All WeatherExterior Emulsion is a high acrylic, antifungal, antialgae, soft sheen emulsion with very high weather-resistant properties.

Application

  • FINISH/USAGE: Exterior
  • TYPE: water-base Exterior Primer
  • COLORS AVAILABLE: 4 bases (white, light, medium, dark )are available. The base material may be tinted with universal colourants to a full range of custom colours.
  • PRACTICAL COVERAGE: 70-80 square feet per litre for 2 coats depending on the porosity of the substrate.
  • LIMITATIONS: Not recommended for floors or decks.
  • SURFACES: Interior plaster, drywall, concrete and masonry surfaces. This paint can also be applied on hardboard siding, gypsum board.
  • NEW WORK: Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with suitable crack fillers for the best results. On new drywall, use of one coat of primer on wall putty & 2 coats of finish is recommended.
  •  PACKING: 20 Lit, 10 Lit, 4 Lit, 1 Lit.

SURFACE PREPARATION

  • REFINISH WORK: Conditions listed above should be strictly followed. Previously painted, glossy surfaces should be lightly sanded. All primers should be allowed to dry thoroughly before the application of finish coats. Chalky surfaces should be thoroughly washed.
  • SURFACE TEMPERATURE: For best results, ambient temperature is preferred. Frost, fog, or damp conditions should be avoided.
  • APPLICATION: Paints should be stirred well before use. Use of roller or brush for application of paint is recommended. Application of only one coat primer & two coats finish is advisable.
  • Thinning is required for brush/roller application. Use only clean water and approximately 400-500 ml of water per lit.
  • DRYING TIME: Surface dries naturally dust-free in 4 hours. Recoat should be applied only after 4 hours. Drying time may vary depending on temperature and humidity.
  • CLEAN UP: Application equipment should be cleaned with soap and water.

Technical Specification

Type Superior Exterior Emulsion
Thinning Ratio 1:0.4
Viscosity 73KV at 25oC
Sp. Gravity 1.25 at 25oC
Method of application Brush/Roller
Application temperature Room temperature
Application Viscosity 20”
Coverage Area 70-80sqft/liter/2 coats
Drying Time Surface Dry 4 hrs
Minimum recoat time 4 hrs
Brushability Ok
Flow Leveling Ok
Opacity Ok
UV Stability 300 hrs+
Gloss Glossy
Alkali Resistance a)NH4OH vapour b)10% NaOH solution Passed IS+ Passed IS+

Advantages

Very high resistance to weathering (UV, Fungus, Water etc.) and blistering, low VOC, high coverage area with desirable ease of application characterize this paint. Additional features include high water repellence, quick-drying etc.

1 review for ALLWEATHER Weather Proof Exterior Emulsion

5.0 out of 5
1
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Rakesh Prajapat

    “ALLWEATHER Weather Proof Exterior Emulsion” is the Best Water-Base Exterior Primer for Interior Plaster, Drywall, Concrete and Masonry surfaces in Interior & Finishing Products…

    Helpful(1) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    No more offers for this product!

    General Inquiries

    There are no inquiries yet.

    ALLWEATHER Weather Proof Exterior Emulsion
    ALLWEATHER Weather Proof Exterior Emulsion
    Econaur
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart