|| India's First Integrated Platform for Green Building Solutions ||

Hydromx – Energy Saving Nanofluid


Hydromx® is a revolutionary heat transfer fluid that contains Nano-ThermoTM technology. Hydromx® uses stably suspended nano-particles to increase the speed of heat transfer, by heating up (or removing heat from) the fluid and transferring energy in a shorter amount of time, thereby requiring significantly less energy.

It is used to Improve the Efficiency of water-cooled chillers, Heat pumps, and hot water generator units used in various industries. It comes in two variants One is blue which is used in agro-based industries as it is a food-grade material another one is Red which is used in various Industries such as Pharma, hotels, Hospitals, and other kinds of Building Systems.

Submit the inquiry to get direct support from our product team

Added to wishlistRemoved from wishlist 0
Add to compare

Key Features:

  • Operating range of -58 °F to +250°F
  • Up to 35% savings vs water/glycol
  • Return on Investment within 2 years
  • 100% Freeze Protection
  • Reduced carbon emission
  • No equipment change is required
  • 8 years manufacturer’s warranty
  • 15-20 years of life expectancy
  • Non-corrosive
  • Increases equipment life
  • Recyclable
  • Non-carcinogenic
  • Non-flammable or explosive
  • Academia supported
  • 100% Insured


Hydromx® is most suitable for closed-loop heating and cooling systems where efficiency will be achieved by diminishing run-time of associated equipment. Hence drastic increase in equipment life will be established along with less maintenance expenses. Boilers and Chillers are the best examples of where Hydromx can be used.

Higher thermal conductivity of nano particles will increase the heat transfer rate. No matter what the energy source, or how efficient the boiler or chiller is, Hydromx® improves the efficiency of the whole system by transferring energy more effectively.

Successful employment of Hydromx® will lead to lighter and smaller manufacturer components going forward.

Scientific Specification:

Hydromx Measurement Parameters


Hydromx (100%)

Hydromx Solution
with  tap  water* (50%)

(Use of Product)

Colour (at 20° C )

ASTM D 1500



Odour (at 20° C )



pH (at 20° C )

ASTM D1287

8.20 ‐8.80

8.20 ‐8.80

Concentration (at 20°C)

Refractometric measurement


Total Suspended Solid (TSS)

TS 9546 EN 12880


Dissolved oxygen (mg/lt)

SM-­‐4500 OG


Humidity Weight

TS 9546 EN 12880


Freezing Point

Potential diferences reading by multimeter, under application of liquid nitrogen.



Boiling Point

Heating in atmospheric conditions and, temperature measurement by thermocouple



Vapor Pressure
(at 25°C )
ASTM d6378 (at 25°C ) DVPE : 2.9 kPA
ASVP : 3.8 kPA
Vapor Pressure
(at 50°C )
ASTM d6378 (at 50°C) DVPE : 8.3 kPA
ASVP : 9.6 kPA
Vapor Pressure
(at 80°C )
ASTM d6378 (80°C)

RVPE : 6.7 kPA ASVP : 10.1 kPA

RVPE : 36.4 kPA,
ASVP : 39.0 kPA
Density (g/cm³) Pycnometer (at 25°C )



Electrical Conductivity
(City Water 401(µS))
Conductometer (Hanna Branded) (at 25°C)



Total Fe (ppm)
(City Water: 0.069)

Atomic Absorbtion Spectrometer



Dynamic Viscosity
(Pa.s)  (at 20°C)
Malvern Bohlin Gemini II Rotational Rheometer 2.5 10ˉ² 7.2 10ˉ³
Kinematic Viscosity
(Pa.s) (at  20°C )
Dynamic viscosity divided by density 2.228 10¯² 6.76 10¯³

User Reviews

0.0 out of 5
Write a review

There are no reviews yet.

Be the first to review “Hydromx – Energy Saving Nanofluid”

Your email address will not be published. Required fields are marked *

No more offers for this product!

General Inquiries

There are no inquiries yet.

Compare items
  • Total (0)

Get all new Green Card

Green Card is a Premium Subscription services by Econaur to get all Exclusive benefits to make a Building Sustainable by Getting Guidance on Green Building Materials

Shopping cart